Packaging Machine

Foods

Large volume production can be handled with machines such as the SAESA®3000 running 300 tubes / min at diameter 40 mm.

• Shoulder with large and shaped openings
• Standard to large diameter tube from 35 to 50 mm
• ABL for sensitive products such as mayonnaise, condensed milk, needing UV protection
• Sealed membrane and insert options

Toothpaste

Low cost, high volumes and sophisticated decoration convenient cap features.

The SAESA®500Line can match highest tube filling line speeds running at 500 tubes / min (ideal for a through the wall operation).

• Standard tube in diameter range 22 to 38 mm
• Sealed membrane and insert options
• ABL or PBL raw material

Pharmaceutical

Modern plastic packaging with better consumer convenience and appearance

The SAESA®100 offers suitable output of 100 tubes a minute with minimal floor space requirement at reasonable investment.

• Small diameter tube from 12.7 to 25 mm, length 45 – 160 mm
• ABL raw material for body
• Long nose shoulder with small openings

Personal care

Almost no decoration limits due to flat combination print technology used

High speed volume production for mass market products, SAESA®2000s can produce 50 mm PBL tubes with oriented cap application at 160 tubes / minute.

• Round or oval tube shape
• Wide range of diameter from 13.5 to 60 mm
• Body and cap orientation options
• Flip top closures for push on application
• PBL raw materia

After 35 years of continuous effort Alfa Machine is rightly considered a leading company in the field of tailor-made packaging machinery. Our best guide for the future is our past, shaped by Alfa Machine's innovative spirit, its vast experience in machine manufacturing and its personalized after-sales support.

Design and manufacture of FRS-L 10/26 new FFS machine model with integrated IML for the participation in the exhibition Gulfood Manufacturing 2016.

Forming Surface (mm): (65 x 260) & (65 x 390) mm Production Capacity (65 x 65mm): 7,000 - 11,000 cups per hour In Mould Labeling system with 3-sides label Multipacks of 4, 6 and 8 cups Ultra Clean hygienic version Fully servo-driven stations High-end additional equipment

AMS Ferrari is always looking for innovative solutions on difficult areas in the Filling. Creativity - is a virtue, which features the innovative processes that AMS Ferrari brings to the market with a variety of patents and has marked a significant turning point in the filling machine.

AMS Ferrari is an expert in the use of space at the disposal of the customer to install the filling line, packaging and processing lines. This service runs from the technical, logistical and economic requirements, which are the real source data for optimization of engineering design. At the approval of the project the detailed working drawings are carried out.

• Filling Lines for carbonated drinks
• Filling Lines for still liquids
• Filling Lines for carbonated drinks
• Filling Lines for thick liquids
• Filling Lines for milk and juices

 

Audion Elektro B.V. was established in 1947. In the fifties the company started to focus on manufacturing sealing machines besides the trading business. In the past decades Audion Elektro has grown to become a leading name in the packaging industry. Today, with a worldwide dealer network, Audion is represented in more than 65 countries throughout the world.

Vacuum sealers: Vacuum sealers for vacuum packaging, modified atmosphere packaging (MAP) or reducing volume. Machines work with vacuum-nozzle principle.

Application: Used in e.g.: food processing industry, hospitals, laboratories and electronics industry.

Product types: Cheese, meat, fish, flower bulbs, coffee beans, padding/stuffing material, wedding gowns, carcasses, PCB

A member of TASI Group - the largest group in the world uniquely focused on leak testing, measurement, and inspection - Bonfiglioli Engineering is the worldwide leader in Quality Control Solutions for all packaging requirements in Pharmaceuticals, Metal Can & Aerosols, Food & Beverages and Chemicals & Personal Care markets.

Throughout its history, Bonfiglioli Engineering has been able to combine its remarkable engineering expertise with original thinking and innovative technological developments to create superior Quality Control Solutions.

BOSSAR was established in Barcelona in 1992 and soon became a world leader in the design, development and production of horizontal Form, Fill and Seal machines. The organization today consists of more than 90 employees, and over 70 representative agents and distributors who help make up the worldwide commercial network of BOSSAR.

Bossar is a founding member of the Packaging Clúster, and also a member of the associations of Spanish packaging machines manufacturers, such as Amec-Envasgraf.

Due to the globalization and growth of the market, the packaging sector has an increasing position and impact. Nowadays it is possible to pack almost any type of product and its display in pouches has a vast range of possibilities as it provides many advantages compared to other types of packaging.

The engineering of raw materials has also contributed to create packaging films which fulfill the best conditions whilst packaging, achieving the maximum protection and preservation of the product and being environmentally friendly.

BOSSAR has developed a range of machines that synchronize with the necessary elements and accessories to form pouches for a great variety of applications:

• Customization of the pouch in a great variety of shapes.
• Inclusion of auto re-closable zipper for multiple purposes.
• Insertion of different types of valves to make the consumption of the product easier.

Addition of different accessories to facilitate its handling and storage. In many cases a stand up pouch is used as an alternative to cartons, bottles or boxes but without their cost disadvantages.

The effects of the weight of the pouches in the transportation and handling costs compared with other materials for packing should also be considered.

Cookies, several types of “snacks”, cheeses, candies, coffee, spices, nuts, desserts, cosmetics, pharmacy or cleaning products are some of the products which can be packed in pouches.

More than 45 years of know-how of machine construction, especially in fields of packaging, find reflex in our comprehension of quality and performance. The owner is in the same time also a chief business executive, so that we see in our costumers always and first of all partners. It is good for both of us!

From Single Source

The high percentage of own components in our products allow us offering rapid and individual solutions. Reliability, flexibility and compatibility of our facilities provide with smooth proceedings and maximal efficiency. In favor of you!

From Conviction

We stand by Germany as location. It offers a maximum of product and manufacturing quality. It is a matter of course for us to create a professional perspective for young people. That is why we are also occupied in professional formation. In favor for all of us!

Enercon manufactures induction cap sealers which are recognized around the world for providing tamper evidence, preventing leaks and preserving freshness with hermetic seals for packagers of food, beverage, pharmaceuticals, health & beauty products, chemicals & petroleum packages.

We also manufacture atmospheric plasma, flame & corona surface treaters that clean, etch & functionalize surfaces for a variety of ink, printing, coating, laminating, painting, adhesive & bonding applications for plastics, polymers, films, foils and metals.

Why Enercon? Our products are produced by some of the most amazing people in the world. Your success is their success. And that’s why they are committed to delivering you innovative technology solutions with expert personal support wherever you are in the world.

GAP – ITALY – WORLD LEADERS & SPECIALISTS in EXCLUSIVE & DEDICATED EXTRUSION FILMS LINES for :- DOUBLE; TRIPLE BUBBLE; TRIPLE AIR TRAPPED BUBBLE for SIMULTANEOUS – NO CONTACT BIAXIAL FILM ORIENTATION SYSTEM – DESIGNED for LLDPE; EVOH; PA; PP; PLA; PET MULTILAYER STRUCTURES – IDEAL to PRODUCE BIAXIALLY ORIENTED HEAT – SHRINK FILMS & HEAT -SET BARRIER FILMS:

The HM30 thermoformer is a compact FFS line specially designed to manufacture rigid packaging and their subsequent sterilization according to the requirements of the medical business.

The HM30 Medical integrates all the necessary operations for the manufacture of the blister according to the specifications necessary for clean rooms and validable according to specifications. The operations range from the thermoforming of the bubble from a roll, through the loading area, to the operations of sealing, individual punching of each of the figures and ejection of the finished blister.

Henkelman specialises in the development, production and distribution of state-of-the-art vacuum packaging machines. Our leading position in the field of vacuum technology sets us apart from the competition with the largest and most varied range of solutions for the vacuum packaging of food and other products. This is why companies in all types of sectors across the world choose the reliability of Henkelman.

Our machines are ‘Made in Holland’. And you can tell. They combine a tightly crafted and functional design with optimum ease of operation and a long life span. Installation is just a matter of ‘plug & pack’, and the smart design ensures that hygiene standards are maintained at all times.

You can be sure that your machine will be delivered quickly, thanks to Henkelman’s extensive international network of authorised dealers. This network guarantees a high-quality, personalised service and a rapid, efficient response to any questions you may have.

Hosokawa Alpine blown film lines set new standards in film production. Our systems are currently the most advanced on the market in terms of innovation and technology. The lines are characterized in particular by their flexible, economical and reliable operation. As a result you can achieve the required quality and profit from the necessary flexibility whenever required.

Blown film lines for co-extruded film of up to eleven layers

Hosokawa Alpine co-extrusion blown film lines are used today for the majority of film applications. Since different materials and raw material types can be combined these co-extrusion lines are both extremely flexible and highly economical. Our HXS extruder series is of modular design enabling various combinations of extruders from the series. As a result our co-extrusion lines are always tailored to meet your respective requirements.

Hosokawa have been supplying process-technological machines and systems for the manufacture of fine powders for over 110 years. Our milling and classifying machines are employed in numerous applications: for mineral raw materials, in the chemicals industry, for the manufacture of pharmaceutics, cosmetics, foodstuffs and for recycling applications.

Whether you call it size reduction, micronization, milling, pulverizing, jet milling, air milling, or simply grinding, we can help. Our broad application expertise allows us to help you select the technology that works best for your application. We are flexible enough to design and supply a complete system for the most unique applications yet our standard offerings are economical and acceptable for most grinding applications.

We have been designing and selling shrink wrapping machines for more than 40 years. Our extensive shrink wrap equipment includes L-sealers, side sealers intermittent and side sealers continuous motion, form/fill/seal machines, sleeve wrappers (bundling machines), shrink tunnels and a large variety of components, such as gripper infeed systems, transport conveyors, feeding systems, stacking stations and film folding devices. Kallfass shrink wrapping machines operate with Polyethylene films (PE-films), PP- or Polyolefine films.

Kallfass shrink wrapping systems provide solutions for manual or fully automatic film wrapping. With our shrink packaging machines you can wrap single items or multi packs, either fully wrapped or sleeve wrapped as bundled shrinkpacks after preceding collation.

Kallfass shrink packaging equipment is at home in a lot of different branches: e.g. print and paper, contract packaging (fullfilment), food and beverage (e.g. bakery products, confectionery, fruit and vegetables), wood and furniture and many others.

Langguth GmbH is an autonomous medium-sized family-owned enterprise with more then 80 years tradition located in western Germany. Today the specialist for tailor-made machine solution in the field of labelling and container handling employs more then 100 employees and has over 40 agents spread around the world.

At least 60% of the machines are exported. A world wide sales structure gurantees comprehensive and qulified service.

We are by far the largest knowledge bank in this area and you are therefore assured of the best advice of the most competent experts available.

Six basic LANGGUTH company principles:

● We consider the relationship between our customers, suppliers and colleugues as a partnership.

● We listen attentively to our customers.

● We haWe recognize our customers requirements.

● We emphasize on an open-minded philosphy.

● We create the best solution if the optimum is not yet available.

● We commit ourself to design only high-quality solutions.

A versatile machine which packs an almost unlimited range of different products into bags delivering high performance and reliability. Forming, filling and sealing in a single work process.

The continuous motion Form Fill and Seal machine BVC is designed for maximum output performance. The machine is equipped with the Sense&Seal product detection and the high-quality sealing technology Premiumseal also at high speeds. This results in a very high machine efficiency whilst producing perfect bag quality. The product area is strictly separated from the drive area, which ensures that the machine satisfies even the most stringent hygiene demands. In addition, the machine can be quickly and easily cleaned..

All models can be fed manually or automatically by an upstream folder. Designed and built for industrial use, it is able to work 24 hours a day in a continuous cycle with a very low maintenance cost.

Time to change format maximum 20 minutes (varying all three dimensions of the package). This result was achieved by combining mechanical adjustments and facilitated substitutions of the format parts.

All format parameters are memorized and recalled easily on the touch screen display: machine speed, sealing tapes and tapes that accompany the output pack, positions and length of the film for each format.

Olsa was founded by Eng. Bertuzzi to design and manufacture equipment for the production of solids and semi-solids. It is now more than 65 years that Olsa is producing the most reliable equipment for the preparation of liquids, semi-solids and solids for the Pharmaceutical, Biotechnology and Cosmetic industries

Preparation vessels designed and manufactured in compliance with the strictest cGMP guidelines both for sterile and non sterile productions.

PARTECO is a leading Italian company in the design, manufacture and installation of cleanrooms, custom prefabricated walls and integrated ceilings.

Since 1974, PARTECO has created a wide variety of modular systems for the construction of clean rooms based on customer requirements and delivers the product ready to be installed. The company is based in Italy and is active all over the world.

PARTECO offers a complete 360° service that extends from the assistance in choosing the best design solutions until the complete installation of the clean room and subsequent post-sales and maintenance activities. Thanks to decades of experience, the procedures that regulate each step of the different processes allow to keep the activities under control and to develop them in the context of design or regulatory requirements. The active collaboration with the client makes it possible to establish a strategic partnership, often renews project after project.

Automatic powder dosing machines for pharmaceutical and food industry

DOYPACK® – SAUCES – SOUPS – DAIRY PRODUCTS – PET FOOD – READY MEAL – SURIMI – JUICES – READY PASTRY – FRUIT PUREE – SUGAR – HONEY – EDIBLE OIL – VEGETABLES …

PILLOW POUCH – PASTEURIZED MILK – UHT – CREAM – YOGURT – KEFIR – SMETANA – L’BEN – RAÏBI – WATER – JUICES – EDIBLE OIL – ICE CREAM – ICE LOLLIPOPS …

Packaging is the last stage in production carried out for the purpose of safety of pharmaceutical preparations and it protects them free from environmental damages (e.g. humidity or light exposure) throughout their shell life. This process is critical to product quality and also affects the whole business when the drugs reach the patients.

In order to meet such demand, Tien Tuan designed and developed packaging line including 2 main machines integrating with each other.

Following that, blister packaging machine is used to pack tablets, capsules, vials, ampoule in PVC, PVDC, PET, Aclar, Alu. Blisters. Apart from basic function, the machine can be installed additional options to maximize its capacity and increase quality control complying to requirements of GMP.

Blister packs after sealing are transported to cartoning machine for secondary packaging. By automatic blister counting, box folding and leaflet inserting functions, finished blisters are packed following operators’ control.

AMore than 40 years lie between the first PLÜMATEX piston filler and the current FFS line generation. Today, we produce up to 5,000 bags per hour in one process line using our bag manufacturing, Fill and Seal machines. We package, fill and seal infusion bags without any further intermediate step. Here exact dosage, rapid, flow-optimised, low-oxygen and/or aseptic filling are focussed on at all times. And we also ensure decisive advances through our technology for sealing the respective packaging materials: Whether plugging, clipping, welding, flanging, crimping or screwing – we process sealing systems usual in the trade, patented PLÜMAT sealing systems or will develop a completely new closure system for you.

Application and processing of specialty labels and customized product solutions should lend itself to perfectly smooth integration into existing processes. This requires appropriate equipment and systems as well as tailored connections.

• Manual Label Processing
• Label Printing Technology
• Printing-Dispensing Systems
• Printing-Laminating Systems
• Processing of Pressure Compensation Seals
• Processing of Adhesive Die-Cut Parts
• Scanning Technology (Readers)
• Special Solutions
• Services

To give the best of the Pharma Water Treatment
to everyone, everywhere, at any time

In the fast expanding world of the water needs, we want to bring our customers...
● More performance
● A better lead time
● More reliability

throughout the service life of their installations While being leader in production of ultra pure water systems is already our reality, we will continue To add intelligence and communication in our machines and systems, Creating new opportunities of conforming different situations to the international regulations.

It is particularly well-adapted for all the decontamination processes in the pharmaceutical industry (opened bottles, instruments, Petri dishes, textiles…). All products are sterilized with the use of pure steam.

At the beginning of the cycle the air from the tank is removed by the vacuum pump (2 to 3 vacuum cycles). Then the steam is introduced at the appropriate pressure (or temperature) to sterilize the product. The heating level is met. Various phases are usually repeated 2 to 3 times. Refrigeration is realized through internal exchangers and by vacuum drying (evaporation).

ULMA is one of the largest Business Groups in northern Spain, with a presence on the market spanning more than 50 years and a clear commitment to Innovation, Employment and Value Added. It comprises 8 co-operative companies and operates based on 8 strategic business units. It constantly follows a path of Expansion and Growth and its philosophy is based on human and social values. More than 4,300 people work in the Group, generating Total Sales in excess of 700 million euros

ULMA Packaging, specialised in the design and production of packaging equipment and services. With more than 50 years of experience and a team of high qualified professionals, as well as the most advanced design and manufacturing technologies, it offers extensive and innovative solutions in packaging equipment and systems with a main objective: providing additional value to its customers. The added value. ULMA Packaging differentiates itself from the rest of the market by basing itself on solid pillars that sets it apart from the competition.

A team of people made up of highly qualified professionals. At ULMA, there is no doubt that its main asset is made up of the people in the organisation. ULMA Packaging takes care of that human element by fostering their personal development and professional education, dedicating significant resources to their training and ensuring professional recycling and continuous training.

Operating since 1965 Universal Pack is a leader in the production of automatic sachet machines and complete lines with automatic cartoning and boxing, known worldwide for their high output, precision, efficiency, reliability and high mechanical resistance.

Universal Pack machines are suitable to produce single-dose sachets, heat-sealed on four sides or shaped, stick-packs, cartons and boxes using both flat and pre-glued folded blanks. All these machines and complete lines are designed, manufactured and assembled in-house in the factory in Italy, which means Universal Pack is responsible to ensure the complete line is fully functional.

Thanks to the experience gained in over 48 years of activity, Universal Pack has accumulated extensive knowledge about packaging and worked successfully with thousands of different products and films in all markets: food, pharmaceutical, chemical and cosmetics.

Product Inspection

Perfection in food product inspection – everything you need to know in the multi-media library

• X-ray inspection food (Please highlight X-ray inspection)
• Vision inspection systems
• Checkweighing (Please Highlight Checkweighers Separately)

Track and Trace

You’ll fulfil every requirement with our modular systems

• Serialisation Pharma (Please highlight Serialization System)
• Aggregation Pharma
• Serialisation Cosmetics
• Food Traceability

Dynamic Weighing

checkweigher portfolio of the E-M-A series impresses with the utmost accuracy at top speeds and therefore permits extremely high throughputs leading to an increasing line efficiency.

• Highly precise
• Ultra-fast checkweigher
• Easy, user-friendly operation